Takardar Polyethylene Mai Yawan Yawa (HDPE/PE300)
Bayani:
Takardar Polyethylene PE300 - HDPE filastik ne mai sauƙi kuma mai ƙarfi na injiniya tare da ƙarfin tasiri mai yawa. Hakanan yana da kyakkyawan juriya ga sinadarai tare da ƙarancin sha danshi kuma an amince da FDA. Hakanan ana iya ƙera HDPE kuma a haɗa shi da walda. Takardar Polyethylene PE300.
Muhimman Sifofi:
An ƙera shi don ya zama ɗaya daga cikin robobi mafi amfani a duniya, polyethylene mai yawa yana ba da fa'idodi iri-iri. An ƙera HDPE ɗinmu don ya daɗe, ba shi da kulawa sosai, kuma yana da aminci. An amince da FDA don amfani da kayan a masana'antar sarrafa abinci, kuma yana ba da ƙarin fa'idar kasancewa mai jure danshi, tabo, da wari.
Baya ga fa'idodi da yawa da aka lissafa a sama, HDPE yana da juriya ga tsatsa, ma'ana ba ya tsagewa, ruɓewa, ko riƙe ƙwayoyin cuta masu cutarwa. Wannan muhimmin fasalin, tare da juriyarsa ga yanayi, ya sa HDPE ya zama cikakke don amfani a wuraren da ke fuskantar ruwa, sinadarai, abubuwan narkewa, da sauran ruwaye.
An kuma san HDPE yana da babban rabon ƙarfi zuwa yawa (daga 0.96 zuwa 0.98 g), duk da haka yana da sauƙin narkewa kuma ana iya mold shi cikin sauƙi. Ana iya yanke shi cikin sauƙi, a yi masa injina, a ƙera shi, a haɗa shi da walda da/ko a ɗaure shi ta hanyar injiniya don biyan buƙatun da ake buƙata na aikace-aikace marasa adadi.
A ƙarshe, kamar sauran robobi da aka ƙera, ana iya sake yin amfani da HDPE cikin sauƙi kuma yana iya taimakawa sosai wajen rage sharar filastik da samarwa.
Sigar Fasaha:
| Abu | SAKAMAKO | NAƘA | SIRA | AN YI AMFANI DA ALKAMAR |
| Kayayyakin injina | ||||
| Modulus na sassauci | 1000 | MPa | Cikin tashin hankali | DIN EN ISO 527-2 |
| Modulus na sassauci | 1000 - 1400 | MPa | A cikin lankwasawa | DIN EN ISO 527-2 |
| Ƙarfin juriya a lokacin amfani | 25 | MPa | 50 mm/min | DIN EN ISO 527-2 |
| Ƙarfin tasiri (Charpy) | 140 | Kj/m 2 | Matsakaicin. 7,5j | |
| Ƙarfin tasirin da aka yi wa kitse. (Charpy) | Babu hutu | Kj/m 2 | Matsakaicin. 7,5j | |
| Taurin shiga ƙwallon | 50 | MPa | ISO 2039-1 | |
| Ƙarfin fashewa mai rarrafe | 12,50 | MPa | Bayan awanni 1000, nauyin da ke tsaye 1% yana da tsayi. Bayan awanni 1000. A kan ƙarfe p=0.05 N/mm 2 | |
| Iyakar lokacin bayarwa | 3 | MPa | ||
| Ma'aunin gogayya | 0,29 | ------- | ||
| Halayen zafi | ||||
| Zafin canjin gilashi | -95 | °C | DIN 53765 | |
| Wurin narkewar lu'ulu'u | 130 | °C | DIN 53765 | |
| Zafin sabis | 90 | °C | Na ɗan gajeren lokaci | |
| Zafin sabis | 80 | °C | Na dogon lokaci | |
| Faɗaɗawar zafi | 13 - 15 | 10-5K-1 | DIN 53483 | |
| Takamaiman zafi | 1,70 - 2,00 | J/(g+K) | ISO 22007-4:2008 | |
| Maida wutar lantarki ta thermal | 0,35 - 0,43 | W/(K+m) | ISO 22007-4:2008 | |
| Zafin zafi na murƙushewa | 42 - 49 | °C | Hanyar A | R75 |
| Zafin zafi na murƙushewa | 70 - 85 | °C | Hanyar B | R75 |
Girman takardar:
A Beyond Plastics, HDPE yana samuwa a girma dabam-dabam, siffofi, kauri, da launuka daban-daban. Muna kuma bayar da ayyukan yanke CNC don taimaka muku haɓaka yawan amfanin ku da rage farashin ku gaba ɗaya.
Aikace-aikace:
Godiya ga yawan amfani da polyethylene mai yawan yawa, masana'antun da yawa galibi suna maye gurbin tsoffin kayansu masu nauyi da HDPE. Ana amfani da wannan samfurin a masana'antu da yawa, ciki har da sarrafa abinci, motoci, ruwa, nishaɗi, da ƙari!
Kayayyakin HDPE sun sa ya zama kyakkyawan zaɓi don aikace-aikacen cikin gida da waje, gami da:
Layukan Kwalba da Tsarin Na'urar Jigilar Kaya
Allunan Yankan
Kayan Daki na Waje
Tsarin Gudanar da Kayan Aiki da Abubuwan da Aka Haɗa
Alamomi, Kayan Aiki, da Nuni
Daga cikin wasu abubuwa, ana amfani da HDPE a cikin kwalabe, faranti, tankunan mai, kabad, kayan wasan yara, marufi, tankunan ruwa, kayan aikin sarrafa abinci, layin bututu, da kuma cikin jirgin ruwa, RV, da kuma kayan aikin gaggawa na motoci.
Za mu iya samar da takardar UHMWPE/HDPE/PP/PA/POM/ daban-daban bisa ga buƙatu daban-daban a cikin aikace-aikace daban-daban.
Muna fatan ziyararku.
